
A drop of blood, a piece of tissue, or a tube of bacteria can all be starting points for DNA extraction. The goal is the same: recover enough clean, intact DNA for molecular biology, genetic testing, forensic analysis, or pathogen identification.
Getting there takes more than breaking open cells and washing out the DNA. A useful enzyme combination opens cell walls, removes proteins, and clears away RNA. Understanding each enzyme’s role makes it easier to choose an extraction method and support reliable downstream results.
Why DNA Extraction Needs More Than Cell Lysis
Inside a cell, DNA is part of a complex structure. It wraps around histones to form chromatin and associates with other proteins, RNA, polysaccharides, and lipids. Extraction must disrupt the cell membrane and nuclear envelope, where present, while keeping long DNA molecules from being mechanically sheared or degraded by nucleases. Proteins, RNA, and other contaminants must also be removed.
Strong acid, strong alkali, and vigorous mechanical disruption can break open a sample, but they can also damage DNA and introduce variability. Enzymes offer a gentler, more selective approach. Lysozyme disrupts bacterial cell walls, proteinase K releases DNA from protein complexes, and RNase A breaks contaminating RNA into smaller fragments. Together, they form the basis of many modern DNA extraction workflows.
The Main Enzymes and Their Roles

Figure 1. Lysozyme disrupts cell walls, proteinase K digests proteins, and RNase A removes RNA.
Proteinase K Releases DNA from Proteins
Proteinase K is a broad-spectrum serine protease that cleaves peptide bonds on the carboxyl side of aliphatic and aromatic amino acid residues. It remains active over a broad pH range of approximately 4.0–12.5 and at temperatures of 25–65 °C. It can also remain active in 1% SDS, which may enhance its activity.
During extraction, proteinase K digests histones, transcription factors, and other proteins tightly associated with DNA, helping release DNA from chromatin. It also breaks down DNases and RNases in the sample, limiting nucleic acid degradation during later handling. Common working concentrations are 50–100 µg/mL, with incubation often performed at around 55 °C.
RNase A Removes RNA Contamination
RNase A is an endoribonuclease derived from bovine pancreas. It cleaves phosphodiester bonds on the 3′ side of cytidine (C) and uridine (U) residues in single-stranded RNA. Its high heat stability allows it to retain substantial activity after heating at 100 °C. Traditionally, this property has been used to heat-treat RNase A preparations to reduce possible DNase contamination.
In genomic DNA extraction and plasmid preparation, RNase A removes RNA that would otherwise remain in the final preparation. RNA absorbs strongly at 260 nm, so residual RNA can inflate the apparent DNA concentration, lower purity, and interfere with subsequent PCR or sequencing. A high-purity, DNase-free RNase A preparation can be used directly, avoiding an in-house pretreatment step.
Lysozyme Opens Bacterial Cell Walls
Lysozyme hydrolyzes β-1,4 glycosidic bonds between N-acetylmuramic acid and N-acetylglucosamine in bacterial peptidoglycan. Gram-positive bacteria have thick, peptidoglycan-rich walls that can be susceptible to lysozyme. In Gram-negative bacteria, the outer membrane limits access, so lysozyme alone may be less effective. EDTA can chelate metal ions and destabilize that membrane before lysozyme treatment.
Lysozyme is widely used in bacterial genomic DNA extraction, protoplast preparation, and some plasmid extraction workflows. It acts under mild conditions, with an optimal pH of roughly 6.0–9.0, and works well with subsequent proteinase K digestion, phenol–chloroform extraction, or magnetic bead purification.
Lyticase and Snailase Help with Fungal Walls
Fungal and yeast cell walls contain β-1,3-glucan and chitin, rather than the peptidoglycan found in bacterial walls. Lysozyme therefore has limited activity against them. Lyticase breaks down β-1,3-glucan and is commonly used to disrupt yeast walls and prepare yeast protoplasts. Snailase combines activities such as cellulase and pectinase, giving it broader wall-digesting activity against yeast and some fungi.
Keep DNase Out of DNA Extraction
DNases cleave both single- and double-stranded DNA. In a DNA extraction workflow, they are contaminants to control: even traces from the sample, reagents, or handling environment can degrade the DNA being recovered. Proteinase K therefore needs to digest DNases as well as structural proteins. Water, buffers, and consumables should also be RNase- and DNase-free.
DNase I is a useful tool in other settings, including genomic DNA removal during RNA extraction and DNA template digestion after in vitro transcription. In those workflows, DNA digestion is intentional. During DNA extraction, DNase activity is instead a quality-control concern.
Carrier RNA Supports Recovery from Low-Input Samples
Carrier RNA is not an enzyme, but it is often used alongside extraction enzymes when DNA is scarce, including cell-free DNA from plasma and viral nucleic acid samples. It acts as a carrier during alcohol precipitation or magnetic bead capture, helping recover low concentrations of nucleic acid and improve yield and detection sensitivity.
How the Enzymes Fit Different Extraction Workflows

Figure 2. DNA extraction overview: cell lysis, protein and RNA removal, magnetic bead capture, and DNA elution.
Protocol 1: Bacterial Genomic DNA Extraction
Taking Gram‑negative bacteria as an example:
1. Pellet cells by centrifugation and resuspend in EDTA‑containing buffer.
2. Add lysozyme and incubate at 37 °C for 30–60 min to break down the cell wall.
3. Add SDS and Proteinase K, incubate at 55 °C to digest proteins and DNases.
4. Treat with RNase A at 37 °C to remove RNA contamination.
5. Purify via phenol‑chloroform extraction, spin column or magnetic beads, followed by ethanol precipitation or DNA elution.
For Gram‑positive bacteria: use higher lysozyme concentrations, extend incubation time, or supplement with lysis enzymes such as achromopeptidase for efficient cell wall lysis.
Protocol 2: DNA Extraction from Animal Cells & Tissues
Animal cells lack cell walls, so the workflow is simpler:
1. Lyse cell membranes directly with lysis buffer containing SDS and EDTA.
2. Add Proteinase K and incubate at 55 °C.
3. Digest residual RNA with RNase A.
4. Purify DNA using magnetic beads or spin columns.
Tissue samples generally require mechanical disruption (liquid nitrogen grinding or tissue homogenization) before enzymatic digestion.
Protocol 3: Fungal / Yeast DNA Extraction
1. Harvest cells and wash with an osmotic stabilizer (e.g., sorbitol).
2. Add lyticase or snailase, incubate at 30–37 °C to generate protoplasts.
3. Further lyse samples with SDS and Proteinase K.
4. Treat with RNase A, then recover DNA by phenol‑chloroform extraction, spin columns or magnetic beads.
Protocol 4: Automated Magnetic Bead‑Based Extraction
Magnetic bead purification is widely adopted for high‑throughput workflows, including clinical pathogen testing and forensic library preparation.
General workflow: Lysis buffer + Proteinase K incubation → nucleic acid binding to magnetic beads → magnetic separation → wash steps to remove impurities → low‑salt elution.
This method avoids hazardous phenol‑chloroform, suits liquid handling automation, and delivers excellent reproducibility and safety.
Match the Enzyme Combination to the Sample
The efficiency and quality of DNA extraction depend heavily on choosing enzymes that work together. Proteinase K dismantles protein complexes and inactivates nucleases, RNase A clears RNA contamination, and lysozyme, lyticase, or snailase addresses the sample’s particular cell wall. Bacteria, fungi, animal cells, blood, tissues, and plant samples each call for an appropriate digestion combination and incubation conditions.
Yeasen offers enzymes, supporting reagents, and extraction kits that cover the DNA extraction workflow. The range includes options for routine laboratory research and high-throughput clinical testing, allowing the product combination to match the sample and application.
Yeasen Products for Nucleic Acid Extraction
|
Category |
Cat. No. |
Product |
Application |
|
Proteinase K series |
Proteinase K |
Powder; routine DNA, RNA, and plasmid extraction. |
|
|
Proteinase K, low DNA residue |
Solution; applications requiring low microbial background and pathogen nucleic acid extraction. |
||
|
Proteinase K Solution (20 mg/mL) |
Solution; routine DNA, RNA, and plasmid extraction. |
||
|
14809ES |
Thermolabile Proteinase K |
Epigenetics research. |
|
|
Nucleic acid precipitation aids |
Carrier RNA, 6 µg/µL |
Helps reduce nucleic acid adsorption to tube walls and supports nucleic acid precipitation during purification; viral nucleic acid extraction and low-input sample extraction. |
|
|
Carrier RNA Powder, 216 µg/tube |
|||
|
Carrier RNA Powder, 310 µg/tube |
|||
|
Carrier RNA Powder, 80 µg/tube |
|||
|
Carrier RNA Powder, 155 µg/tube |
|||
|
Carrier RNA Powder, 10 mg/tube |
|||
|
10408ES |
Linear Acrylamide Solution (5 mg/mL) |
Supports nucleic acid precipitation during purification; nucleic acid extraction from low-input samples. |
|
|
RNase A |
Ribonuclease A, bovine pancreas |
DNA and plasmid extraction. |
|
|
RNase A (100 mg/mL) |
|||
|
RNase A (10 mg/mL) |
|||
|
DNase I |
Deoxyribonuclease I (DNase I), bovine pancreas |
Bovine pancreas-derived; DNA digestion during protein extraction. |
|
|
Deoxyribonuclease I (DNase I), bovine pancreas |
|||
|
Recombinant DNase I, RNase-free, E. coli-expressed, liquid |
Recombinant E. coli source; DNA digestion in RNA extraction, reverse transcription, and DNA library preparation. |
||
|
Recombinant DNase I, RNase-free, Pichia-expressed, liquid |
Recombinant yeast source; DNA digestion in RNA extraction, reverse transcription, and DNA library preparation. |
||
|
Cell wall digestion |
Lyticase (10 U/µL) |
Hydrolyzes β-1,3-glucan glycosidic bonds in yeast cell walls; protoplast preparation and fungal nucleic acid extraction. |
|
|
10402ES |
Lysozyme |
DNA extraction from Gram-negative and Gram-positive bacteria. |
|
|
Snailase |
Yeast cell wall digestion; protoplast preparation and fungal nucleic acid extraction. |
||
|
Laboratory contamination control |
Surface RNase Remover (with Spray Bottle) |
Removes RNases to protect RNA. |
|
|
19702ES |
DNA/RNA Remove |
Removal of nucleic acid aerosol contamination in the laboratory. |
|
|
Sample preservation |
RNAsafe Tissue Stabilizer |
Preservation of animal and plant tissues, including brain, heart, liver, pancreas, kidney, spleen, testis, muscle, and plant stems and leaves; also for yeast and tissue-cultured cells. |
|
|
RNAsafe-ICE Frozen Tissue RNA Stabilizing Transition Solution |
Preservation of animal tissues, including liver, kidney, spleen, lung, heart, thymus, and pancreas, as well as cultured cells and white blood cells; protects frozen samples during thawing. |
